电流变技术在工程中的应用

电流变液是一种在电场作用下能瞬间从液态变为固态的智能材料．简要介绍了电流变液及电流变效应、电流变液的组成及影响电流变效应的主要因素．综述了国内外电流变技术在工程中的应用研究进展及发展趋向,展望了这一技术在军事领域中的应用前景．     

H2可以作为o-H2和p-H2的混合物处理吗? —兼释H2的残余熵

本文阐述了H_2不能作为正氢和仲氢的混合物处理的理由,提出了从光谱熵的定义出发解释H_2的残余熵的方法。     

流体动力式强声源研究

针对现代强声学技术研究的需要,从声压级的角度,对所设计的流体动力式强声发生器的性能参数开展了实验研究,得到了工作压力、簧片与喷口之间的距离以及簧片的劈角对该强声发生器辐射声场声压级的初步影响规律.实验结果表明,在较优的工况条件下,该强声发生器出口处可实现140dB(最大声压级)以上声辐射输出.     

多GPU的可压缩湍流并行计算

利用CUDA Fortran语言发展了一种基于GPU的计算流体力学可压缩湍流求解器。该求解器基于结构网格有限体积法,空间离散采用AUSMPW 格式,湍流模型为k-ω SST两方程模型,采用MPI实现并行计算。针对最新的GPU架构,讨论了通量计算的优化方法及GPU计算与PCIe数据传输、MPI通信重叠的多GPU并行算法。进行了超声速进气道及空天飞机等算例的数值模拟以验证GPU在大网格量情况下的加速性能。计算结果表明相对于Intel Xeon E5-2670 CPU单一核心的计算时间,单块NVIDIA GTX Titan Black GPU可获得107至125倍的加速比。利用四块GPU实现了复杂外形1.34亿网格的快速计算,并行效率为91.6%。     

长贮过程中发动机HTPB推进剂老化机理分析

为揭示固体推进剂在长期贮存过程中的老化机理,解剖了自然贮存19年贴壁浇注的端羟基聚丁二烯橡胶推进剂装药发动机,沿着药柱径向不同位置进行了取样,并采用扫描电镜、能量色散X射线光谱仪、红外吸收光谱、交联密度等多种手段对这些样品进行了测试分析。研究发现：贴壁浇注发动机药柱不同位置推进剂的老化程度不尽相同,越靠近非金属壳体位置,推进剂的老化程度越严重。进一步深入分析表明：除了丁羟胶中双键的氧化断链和端羟基的缩合等影响推进剂老化,铝粉氧化产生的铝离子会催化丁羟胶双键与氯气或水发生加成反应生成■双键和仲醇,而铝离子迁移和分布的不均匀会引起药柱老化的不均匀性。研究结果对推进剂配方设计和防老化措施的研究具有重要意义。     

Numerical simulation of base flow with hot base bleed for two jet models

In order to improve the benefits of base bleed in base flow field, the base flow with hot base bleed for two jet models is studied. Two-dimensional axisymmetric Navier–Stokes equations are computed by using a finite volume scheme. The base flow of a cylinder afterbody with base bleed is simulated. The simulation results are validated with the experimental data, and the experimental results are well reproduced. On this basis, the base flow fields with base bleed for a circular jet model and an annulus jet model are investigated by selecting the injection temperature from 830 K to 2200 K. The results show that the base pressure of the annular jet model is higher than that of the circular jet model with the changes of the injection parameter and the injection temperature. For the circular jet model, the hot gases are concentrated in the vicinity of the base. For the annular jet model, the bleed gases flow into the shear layer directly so that the hot gases are concentrated in the shear layer. The latter temperature distribution is better for the increase of base pressure.     

Study of simple plane wave generator with an air-metal barrier

Plane wave generators (PWGs) are used to accelerate flyer plates to high velocities with their generated plane waves, which are widely used in the test of dynamic properties of materials. The traditional PWG is composed of two explosives with different detonation velocities. It is difficult to implement the related fabrication processes and control the generated waves due to its complicated structures. A simple plane wave generator is presented in this paper, which is composed of two identical cylindrical high explosive (HE) charges and an air-metal barrier. A theoretical model was established based on two different paths of the propagation of detonation waves, based on which the size of air-metal barrier was calculated for a given charge. The corresponding numerical simulations were also carried out by AUTODYN-2D^® based on the calculated results, which were used to compare with the theoretical calculations. A detonation wave with a flatness of 0.039 μs within the range of 70-percent diameter of the main charge was obtained through the simulations.     

海水淡化系统余压能回收过程的仿真模拟

针对阀控式海水淡化能量回收装置增泄压过程中压力波动和浓盐水海水掺混导致反渗透膜组件工作负担变大的问题,对增压容器和增压过程建立模型,使用流体力学软件Fluent仿真增压过程,得到了增压过程液压缸内部流域的压力和速度分布。探究了混合段液柱活塞的形成过程和长度变化,通过对比液压缸结构和进水口流速变化对混合程度的影响,给出了用混合段做液柱活塞的参数特性和适用性,为海水淡化系统余压能回收设计提供依据。     

氦原子1S, 3S, 1P, 3P态的电子关联计算

本文从二次量子化公式出发,选取广义Laguerre多项式乘以γ~lcxp(-alγ)作为单电子径向函数完全集,这里a_l是依赖于轨道角动量l的变分参数,用组态相互作用方法计算了氨原子~1S,~3S,~1P,~3P态的能量和波函数。当组态限于主量子数n≤4,计算的能量相对精度约为99.9%;当组态限于%≤6,能量相对精度约为99.99%;而Hartree Fock方法的能量相对精度约为99%,利用原子波函数计算了一些原子参数,其结果与其他作者的结果符合很好。     

基于CFD方法的典型防空导弹气动反设计研究

建立了基于计算流体动力学(CFD)的防空导弹气动反设计方法,对世界几种典型防空导弹气动外形进行了反设计研究,计算了气动特性参数,进一步通过综合对比,剖析了气动布局以及气动外形的主要特点,最后给出了总结和启示,可作为工程设计的有益参考。